Most reacted posts

Corrected

Thanks 42ohms i found it just as you wrote that

I was thinking that I would have to isolate the neutral also

Ended up getting schieder 6848 yeah so the growatt, 160lbs ,still hanging on wall

Basically I have decided to bite the bullet for a solark 12k which is 3 times the price but much more intuitive and can incorporate ac coupling

SOLD

Originally posted jan 31 see for details ,new price 2000.00 in addition inverter includes pdp s and ac and dc breakers and scp ,and is no longer wall mounted as shown in pics on original post of jan 31. Location, Valparaiso indiana for local pickup

You are correct i will correct

It is a 12000 dvm mpv

Assuming the inverter is wired to the gridSo no neutral is required on the input side of inverter just a ground bonded to the neutral on the main panel and only there am I correct so far? Ok this inverter has a pass thru mode um where is the neutral coming from on the output if the inverter is...

I'm 2 hr n of indy

No doubt

Upon initial connection inverter fan comes on for a second then nothing . This is my first action in response to this situation. Am i not using correct start up sequence? I tried with dc breaker in off and on position with inverter in bypass mode and ac turned off to the inverter when...

Yeah was thinking just that but I hadn't considered a common neutral to bath panels

I was thinking I had to isolate the neutral also

Easy fix is what?

The last system I had I grounded the negative terminal of the lead acid battery bank since the eg4 s are electronic would the same procedure apply? 5 eg4 s

Looks like that one thanks

Thanks for theconsideration but i wll keep it altogether

Yes it is still available

The unit is roughly 160 lbs

I took it down and went to the 18k . It worked fine while i had it up

Yes it is the higher pv input model

It's my understanding that there is a grid assist for battery charging and not for supplemental assist of loads. So new question can a 4 pole m annual switch be wired for dual outputs as opposed to dual inputs. In this way it would act as a bypass in the event of inverter failure and...

Can anyone recommend a 3 pole double throw 80 amp or higher switch that has an encloseure and won't break the bank.? Using for a inverter to subpanel bypass thanks

Gently used 6848 xw pro nverter side and bottom pdps, ac dc breakers, scp input panel $ 1500 pick up only valparaiso indiana

Thanks goose

Yes it is im in nw indiana