Most reacted posts

Thanks I will keep that in mind!

Well that ui was horrific and it would not connect to a linux or windows pc using the same cable as I have running on my pi which does connect to solar assistant. May just be my experience but the software they provided was essentially useless for me.

I have set everything I can see that will tell the inverter to not let it die, yet for some reason it just keeps dropping and dropping. The inverter says it is charging, the PV says it is charging, but on the battery I see - amp drains. I am running a mpp LVX6048MP, and a jakiper JKV48v100 I...

My MPP LVX6048WP has been throwing errors since I installed it, a reboot would fix most except this error 13/14 that would come up and go away. I contacted mpp and they provide new firmware. The issue persists, I work with them and they provide another fix. The errors are now gone but the fans...

@Samsonite801 what an elegant solution, relying on software vs a hardware switch. Perfect! It of course is left to me to remember to charge the battery. I will consider this, I may do this on top of figuring out the settings. Unfortunately the documentation is not fantastic, there is...

not from solar assistant unfortunately. I have also found out I should be using solarpower, not watchpower which I still have not got working correctly. I have made all the other adjustments on the inverter itself.

seems it was due to the inverter not reading the battery correctly and draining far past what was set. I have got the rs232 for the jakiper to feed solar assistant and it seems to be working correctly now

Has anyone else updated to the newer 1.3 for the LVX6048MP? My battery settings seem to be all messed up in the solarpower software, and for some reason I have voltage on my Generator input which is not connected to anything. I did not notice this before the upgrade. Anyone else ?

Thanks for that! If these issues persist I will have to pull a warranty claim. Good thing I bought it in country and on paypal

Hey thanks for that ! I think I am in the same boat it is a warning not an error and it seems if you have any settings above the bottom voltage of the battery it will throw the error. I was talking to MPP and said I don't want to run my battery down that low.. the answer was "well that's what...