Rednecktek's latest activity

Grabs popcorn... :sneaky::unsure: Do such beasts exist? I know there are 12v mini-splits you can get for trucks, but honkin wires are...

Either a combiner box or a handful of inline fuses. The combiner box is the much better option.

From what I'm finding, here's the trick to make it "Code Compliant" since you can't run 2 wires to the same lug: Option 1: Dual Circuit...

Would the AIO have its own battery on top of the golf cart? If so, just tie in a breaker off the battery, run a fat cable out of it to...

And yet you'll see so many Victron fanboys regularly telling people you have to use Class-T fuses... :unsure:

My experience is mostly with ANL fuses. The cheap plastic bodied ones are trash, they almost always blow prematurely and the material...

For two batteries you can totally use the diagonal method, just take the Positive off battery-1 and the Negative off battery-2. You'll...

OK, stop. Take a breather. Grab a drink and sit down. You're getting yourself all sorts of confuzeled here. What battery voltage are...

I've found that your BMS needs load and charging source connected to come to life. Your SCC needs to see the battery to wake up as well...

Considering that you're likely to only have 1 penetration coming down inside from the roof, you're likely not going to need any inline...

Another thing on the wire lengths is that the Positive wires should be the same length, and the Negative wires should be the same...

From reading Will's book, it sounds like I could safely use 2 AWG to go from the batteries to the bus bar, and then use 2/0 to the...

Better than having a mouse die in an air vent. Then people think you've got a dead body in the trunk...

Legal? I can't say for sure but I've done it many times. You've got a few ways to do it. -Install a jumper wire from underneath one of...

For me the panels worked great, right after the BMS died...

Why is it that every time I get in some new panels or I want to reconfigure an old array the weather turns bad for several days? It is...

Do not do this, the batteries in series will be unbalanced. Use a 24V to 12V buck converter.

Patience Grasshopper. Patience.

You still can do a ground array - get 4 panels hook them up in series, then connect to your ground mount mppt. That’s if you decide you...

If you carefully select the ground mount panels so they work well with your roof mount array - yes you can. They will just be another...