Rho's latest activity

The point of my solar is to have power when the grid fails. It's a bonus if I become less dependent on the man along the way. One of...

From my reading, the early days of solar were adventurous 'stick it to the man' types. Offgrid/ back to the land... Now, it's more of "I...

Is it safe to assume there's been no action to replace or quickly repair your broken Megarevo yet? Ideally they are sending a...

Yes, she is. She has been in touch with Megarevo supposedly and some resolution has been promised. Nothing has happened yet though.

@minerva Is Tina still communicating with you? I'm dealing with a different manufacturer on troubleshooting and it's so painful waiting...

It blows my mind there has been absolutely no CS or TS support from this company, at any point, for anyone! Very disappointing...

MosFet would be my bet.

If its as small as I think it is then it's probably part of a semiconductor. I would suspect a Mosfet went boom.

It's open, but there are two layers of parts. The thing that blew must be in the back. It is under warranty; we'll see what that's worth.

With all its quirks, I have been successfully using an R8NA Megarevo hybrid inverter for about 6 months. This morning it started...

Thanks Will for taking actions and trying to eliminate what you can in the future!

I agree with everything you point out and more BUT he has produced a reasonably good product at a reasonable price and you can see...

It can only update based on the data it receives. First look at the source data before assuming SA itself is at fault. Not sure why...

Explain how load is present not connected to Grid and Growatt spf 8000 dual mppt showing load in off position. Can only charge in stand...

CT clamps are loose fitting clamps that are clamped onto cables on your electricity incoming supply, they detect which direction the...

Strange I dont get Automations on Software version: 2024-01-23 I use Growatt TL3-XH

For sure. I would not have done a lot of what I have without this interactive ability to control stuff. I started with a cheapie clone 4...

Clever on the 5S 9V batteries. A) absorption: 3.45-3.55V/cell float: 3.375V/cell B) check setting 12. If your battery voltage is...

That should be obvious if you open the meter enclosure. If they did something that the padlock would have prevented, you should be able...

Yes it is. Thank you