rockhardhoosier

I got a tester and all the cables tested out good, still running almost 70 hertz

Might be worth powering down the system and testing continuity on all the data cables. A cheap ethernet cable tester would assist with...

Yes none of them look damaged and and the connection feels tight

Hey so sorry been gone for awhile, got back to this now. When I'm turning on the inverters without any load it is going up to 69.9...

Something has to be wrong with voltage or frequency, as seen at the outlet. Under load, measure it while fryer is plugged into other socket.

Ok ,yes you are correct on how the inverters are paired and there are to for line one and two for line 2. So what I did (could have been...

I did just try it on an outlet that wasn't on the same line and still done same thing.

Just a dumb thought here, fans and motor's not working correctly usually means not a pure sine wave or very bad frequency variance. Not...

Airfryer is 120 with 3 prong plug..Neutral is not switched along with L1/L2 in transfer switch .

Describe “not working correctly,” please. That a) all the GFCI’s tripped, b) “anything with a motor” not working right, and c) you...

I'm not sure that loose/lost neutral would trip GFCI. Maybe one that checks voltages between L/N/G. If there is a second connection...

Ok so the airfryer has a fan on it. When switching to solar the fan doesn't work but the air fryer does heat up. So I took the Fryer...

I will show this to my electrician as I understand very little of you reply. As I am not an electrician. Also I meant the batteries are...

I might also add everything has worked fine for almost a year,besides occasionally having to tighten up a wire. Yes right at 24kw...

I have 4 sunny island 6048 inverters with 4 Fla 540 amp hr batteries wired in parallel. I have a manual transfer switch . Everything...