rpdom

The lamps you're not allowed to have. Exploring the Dubai lamps bigclivedotcom

Forgot to add; here's the connector you'll need:- https://www.ebay.co.uk/itm/195668989940

Here's my 2p worth, although @rpdom has covered most items already.... Yes, that configuration is possible - I have similar...

In your situation you should be fine as only one of your inverters will be a hybrid with batteries and the other one will presumably be...

There's no way I know of being able to connect the output of one Solis inverter to the MPPT of another. Some of us are connecting...

It should be possible to add a non-hybrid PV inverter to your setup. The RHI will detect any export from the other inverter and use it...

I should have realised about the Agile time slot. :fp For my inverter I used to use the Solis Cloud web site, or the Solis App, but now...

That looks wrong. The way you've got that set up you will be charging your battery from the grid from 11:00 to 14:30 and from 15:00 to...

Only semi automated, and using my own bits of code in C and Python, but not with Home Assistant, so of little help here. I can point to...

I am thinking about doing the same thing. If they can really get the panels up to 30% or more efficiency then my 365W 60 cell panels...

If prices drop sufficiently, and efficiency goes up enough, in 5 years or so I might replace all my panels with new ones. If I did that...

The ring should turn with a small amount of force. Make sure the stick itself does not turn. The mistake a lot of people make is to turn...

(y) good point - I'd forgotten about that as an option. ... thank goodness for a RPi and some RS485 adapters then ;)

Yeah, charging batteries on a flat rate isn't worth it other than to prevent the batteries from over discharging. Now, on a nice TOU...

Hi everyone. Just signed in today although I have read any number of threads here previously. I have lived off grid on a mountain side...

I've looked at Flux, but have decided that I'm better off with Agile for import and Outgoing for export. Agile may not be as cheap as...

It's something that catches most of us out the first time. When I first set up a timed charge test I wondered why my batteries were...

🥳🥳🥳 holy cow that's a lot!

The discharge settings are for discharging your battery to the grid. For normal use (discharge to load) you leave them all at 0:00.

Those resistance values should work for anything up to around 18V to give a 0 to 3.3V output for your ADC. You have got the ground of...