shvm

Battery voltage STILL IS the primary indicator of whether a battery is charged or discharged fully. It is only in-between that we...

From your statement “Then it is a simple matter of applying linear regression to find the desired (voltage, current) pair connecting...

Any voltage between [3.65 V to FCV] (which I'm taking as 3.37V) is acceptable target bulk voltage in the model. I personally use 3.525...

Smart! Take your best Voltmeter, capable of highest precision and measure the FCV of a cell, with and without a resistor in series...

This is one such option. https://github.com/celsworth/lxp-bridge There are too many common things between 6000XP and LXP units. I...

I can take two identical cells with same FCV. and connect them in parallel as depicted. The capacity of the combined cell has doubled...

This is true on some of the cheap and nasty cell makes a float voltage of 51,8V- 52,5V is not uncommon for a 15S battery.

It's not the rare most powerful days you need to worry about, the higher temperatures that go hand in hand will limit the voltages. The...

I have a first hand experience in this well before even authoring this guide. What I have realised during the last four months or so is...

Here's where I started a mess. Also I knew more by the second half of this thread than when I started it. And I know more today than I...

Now that I am aware of your earlier work on charge termination I would like to read up on them.

The jist of what I got from the OP seems to support your other thread ideas with charge termination and single voltage set points. Hence...

Any LFP Cell with modern chemistry when fully rested after a full charge will have a FCV hovering just above 3.37 V. Temperature do...

That may be a language barrier. Take a cell, and subject it to full charge (take note of the temperature & misc. Env conditions). Then...

Here you admit you're prolly not grasping "my method" . Further clarification, it is not something that I invented in the first place...

I see in the news this morning this interesting tidbit Well dandy. Not sure exactly how this can be achieved since your average low...

This is from the SOC OCV charge curve from EVE for the LF230. I shared it on this thread as well as an excel that helps with...

I have already seen the PDF you sent. Testing methodology, description of procedures, anything ?? that will help me (or anybody else)...

You can always inspect the source code here at...

I wasn't talking about cells getting imbalanced at the end of the charge cycle. I was talking about newly bought cells, to be put in a...