Sportzfann

You can run surface across drywall to the other panel with your liquid tite conduit. They make a 90deg connector that will go in the...

Yes the Cerbo can adjust the input amps for a Multiplus from shore/grid/generator, also change its status: on/off/inverter only/charger...

Rocket, I saw you have a multiplus 2x120 do you know if I can control the multiplus with a Cerbo 50/70 touch ? I would like to be able...

I set the amperage down to 20 amps for the second controller, the one that was getting warm. when the chargers get to the absorbing...

Okay great that’s what I was thinking, once I reach 14.4 it’s pretty much 100%. I just saw my CC go from bulk to absorption at 14.4 v...

Q-dog, i did order some new blue sea 50a breakers and #6 wire I checked that stereo inline fuse and it was getting warm so I shut it...

Rocket, I have ordered the #6 stranded and 2-50a blue sea breakers, hopefully they show up on time, I will be in Yuma next week so I’m...

Rocket, Q-dog Thanks for the responses I did see a drop across the one fuse holder, when I get back home I will change out the wire to a...

Great thanks I will look at that. Could be the issue.

I have a mix of wire: marine grade stranded 2/8 to top CC from POS buss thru 30a fuse to batt terminals on controller. 2/10 on lower...

I will check the connections with my fluke meter. This morning I looked and saw the 3 voltages are virtually the same, so it seems to...

I’m not sure if I did that. I might have when I originally set up the inverter i did just connect to my network so both CC are showing...

The voltages of these CC are getting closer now…..? Both in Bulk charge now, also still looking at connections.

Can these hangers be done while the solar is active ? I was going to wait till it’s dark, open the solar breakers and then change...

Will the charge controllers talk thru the blue tooth or do I need to add another device, how do I connect the two ? Thanks

So I just checked the voltage at the CC battery connections and both read 13.71 & 13.70 I have tightened the terminals at the PV and...

I will go back and look, the lower unit is the new CC (WUU). I have #10 from roof down to buss. 14.28V I have the second unit (XKV) is...

Rocket, I have the 2 in parallel on each controller, I split the panels up with one pair shaded and the other less shaded, I checked...

I like the idea of experimenting with the pairs so yea I think I will start with the 1pair series and 1 pair parallel. I have #8...

Oh haha good to know thanks.