TK1979

I just scanned the manual and didnt see a way to limit power except under timed charge/discharge

this thread is about HESP only

Does anyone know if you can limit power output on the HESP or ASP units (ie limit the 10kw unit to 8kw output)? On my Growatt this is...

It won't use any of the extra but you'll be fine as long as you don't exceed volt or amp limits

I know the specs/manual on the SRNE HESP inverters appears to only allow 110% overpaneling (6600w per mppt on 12kw) but do you think it...

be warned sometimes things might take longer than expected..... my shipment from Borick came in today was supposed to be here in a few...

Got a quote back today for the HESP48120U200-H. DDP Airfreight, the pair for $4716. Getting harder to rationalize my other thinking...

Considering my batteries will be on a ship, I suspect I'll look into that. I have other prep work to do over the next couple of months...

I jsut got serious Paul Revere vides.... "one if by land, two if by sea"

You can save even more if you ship by sea. About $450 for two by sea

Elia elia@boricksolar.com

These were the prices I was quoted on July 9th. Two of the HESP48100U200-H Price: Inverter: 1779usd/pcs Air Freight (DDP): 909usd...

@42OhmsPA I figured that you'd like those 4awg pin terminals. I hope they help you in current and future projects. BTW, they are rated...

Note on the SRNE HESP (12KW) terminals are marked CU conductors only.

I used 6AWG from Wirenco. Iirc @Zwy confirmed 4AWG won't fit. My reasons were I wanted everything in conduit and the THHN was cheaper...

Yes, I now own 3 of these. One is installed in my current pack and I'm still waiting for a shipment of an additional 32 x 280Ah cells to...

A little "imbalance" action. Stove top, dryer for 240V big loads. Convection oven, electric kettle, water distiller and dehumidifier...

Total power on each phase is the first line. 2nd line is the amount on each inverter on each phase 1, 670W on 1st unit and 663 on the...

11,000 watts per inverter for 5 seconds. That is 22,000 watts for 5 seconds for the pair. The problem is the 140 amp battery limit per...

84A * 240V = 20,160W Unlikely to handle that unless you install a soft start on the compressor.