I have a 414.ah battery bank. Im looking to add a shunt to monitor the energy draw. will a 500 amp shunt be ok? what if I added a battery down the line and had 620AH? the max draw from batteries is 200 amps. however I will not be using that much at once.
also connecting a shunt is right after...
I have two 206ah batteries in parallel. I have a 3,000 watt Renogy inverter. When i turn the inverter on it beeps constantly. I believe that this warns that voltage is too low. My renogy dc-dc charger with mppt says that its drawing 140 watts but still at 13.9 volts when trying to turn on, and...
I have a 12v system, 214amph of battery. I have an induction cooktop hooked up to my 3000 watt inverter. When using other appliances everything is fine, but when using my 1800 watt induction cooktop, it trips my 250 amp breaker. it does this when turned any higher than the medium setting. Is...
I have two 206 SOK batteries in parallel connected to a mppt charge controller with dc-dc.
Recently, when running a 60watt fan, the amp draw will randomly jump up from 4ah draw to 8.5 ah draw and randomly drop to 2.5 ah and back up to 4ah. I can visually see this on my battery monitor screen...
Im wondering if this setup will work to be able to turn on two lights using two switches.
I want to be able to turn on the lights from two different locations but I have no way of making a three way switch. Will this work? or will it cause a short circuit.
I am replacing a breaker on my 460 watt solar array system. 460 watts to a renogy mppt with dc-dc
Is it safe to disconnect the broken breaker i have with a new one, crimp lugs and connect while the panels are in the sun? I will obviously disconnect from my battery before.
I do not have access...
looking to purchase 2 200ah LiPo mighty max batteries to run in parallel. I have not seen very many reviews on these batteries other than on their website. has anyone used mighty max products?
I have a 12v system, 214amph of battery. I have an induction cooktop hooked up to my 3000 watt inverter. When using other appliances everything is fine, but when using my 1800 watt induction cooktop, it trips my 250 amp breaker. it does this when turned any higher than the medium setting. Is...
For Sale:
Two Renogy 20ft 10awg solar connector cables (paid $30
4 Renofy solar connector to sae adapter 12 awg cable (paid $25 each)
MAKE ME AN OFFER
https://www.renogy.com/solar-connector-to-sae-adapter-12-awg-cable/
https://www.renogy.com/solar-panel-to-charge-controller-adaptor-kit/
I have 8 led lights 6 watts each, in parallel, these are connected to a three way switch, and the. To a dimmer. The rimmer works, but only one three way switch is working. When turned off, they stay on partially. Any idea where i went wrong?
LeisureLED 5 Pack RV Boat Recessed Ceiling Light 480...
My 50amp dc-dc charger with mppt is not allowing my 460 watts of solar to charge my batteries.
I have it on the correct settings for my battery type. Below is a picture of what my controller is telling me.
I have two 206ah batteries in parallel. I have a 3,000 watt Renogy inverter. When i turn the inverter on it beeps constantly. I believe that this warns that voltage is too low. My renogy dc-dc charger with mppt says that its drawing 140 watts but still at 13.9 volts when trying to turn on, and...
I connected my solar panels to my renogy dc-dc charger with mppt charge controller BEFORE connecting them to my batteries. Did i just wreck my charge controller? Now its saying that i have no wattage and no amps coming in.
I am connecting a Renogy 50amp DC-DC charger with MPPT. It is about 12 feet from my starter battery. I would like to connect the positive terminal of the charge controller to the positive of the house battery using 2/0 wire. I don't want to have to buy another 12' of 2/0 wire for the negative...
I am purchasing 400AH of lithium batteries. I am debating between two Chin 200ah lithiums, two 200ah Mighty Max batteries, or two 200 ah chin low temp batteries that claim to be able to charge at -4 f due to internal heating system. Please let me know what the best option is, or is there a...
I have two SOK 206ah batteries. I am looking to add them to my solar system. I have a 50amp dc-dc mppt charge controller. it has a lithium setting. can someone walk me through how to install properly starting with brand new out of the box batteries. Thank you.
I was wondering if it is possible to wire these two batteries in parallel. Are they compatible and safe to do this?
12v lipo 200ah deep cycle lithium battery
lipo100ah battery deep cycle lithium battery