Most reacted posts

I have four 12v Rich solar batteries (LFePO) in series making a 48 volt battery for my LV6548. Last two mornings I go out and there is a fault and batteries are not charging and shows they are empty. Each battery checks out just a bit over 12v EXCEPT the last one that the positive terminal...

My original plan was to use one LV6548 to power my 120v needs in my house, but want to use the existing breaker panel box so I've decided to purchase another LV6548 so I can run two power legs to the box to simplify my install. I plan on installing a small breaker box and have it connected to...

Disconnected the PV cables from the inverter and checked voltage, it was only 26.6v, but it has been rainy today and cloudy so now that the settings have been changed to run single phase, once I get the volts up it should detect the PVs. From what I read in the manual, the voltage from the PVs...

Thank you. Have noticed on the two I have hooked up to the LV2424 only 3 bars showing up on the icon and inverter not charging until drops from there. Stated was at 26.3v on the screen of inverter.

So by what I've read on this forum, one can over panel the inverter and the MPP Solar inverters will only take what they can handle from the panels in terms of watts as long as one stays below the amps and volts. My plan is to string together 12 Rich Solar 200 watt into two series of 6 in...

I was going to go with 5s2p with the silfab 380. We do get down in the single digits once in awhile in winter, but not often. If I didn't get the temperature coefficients mixed up (Midnite solar doesn't label the coefficents by the same name as the manufacturer) will hit 250VOC at 7*F...