Eg4 24k mini-split help
- Thread starter bbleier
- Start date
sunshine_eggo
Happy Breffast!
It looks like it should follow that little channel and go behind the screen.
fuzzmunky415
New Member
Does it not feed into that channel, and operate via the filter movement?
fuzzmunky415
New Member
Does it not feed into that channel, and operate via the filter movement?
timselectric
If I can do it, you can do it.
- Joined
- Feb 5, 2022
- Messages
- 19,934
Maybe that channel. lol
This plug does not currently serve a function and does not need to be plugged in.
DaveF
New Member
Thank you! I just finished installing this unit and noted this empty socket. Not seeing anything to plug it into, I just went ahead and finished the install.
A little feedback on the installation instructions:
- If the pipes on the indoor unit are naively bent outwards from the unit, they will not fit directly into the hole set out by the template. We had to bring it back down, and use the template (after cutting out a hole) to correctly place the bend.
- The instructions do not note anywhere that the clearance required by the drain pipe on the underside of the outdoor unit needs a couple of inches extra above any solid base. We fudged an alternative with section of vinyl gutter extending out both sides of the base.
- The male MC4 plug was defective with the installed pin extending beyond the housing - making it difficult to insert. Will be checking the connection with an IR camera as soon as I can
So far, after 24 hours, it's working pretty well.
bbleier
New Member
No, it came from inside the unit, found a video on YouTube that shows it.
Attachments
bbleier
New Member
Also, now that I'm done installing it and I do realize it is for some kind of connection as eg4_Eric said.
Similar threads
