Hi! I replaced old lead batteries yesterday in my system with new lithium batteries and now my controller is snoozing, indicating there's not enough current to charge. Getting in 59v, but no amp. I had to disconnect and reconnect the wiring for the PV array from their breaker box to the controller, but when I had it all back in place yesterday afternoon there seemed to be some current. Any ideas? This is an inherited system; I did not build it. Thus, my understanding of it is ongoing. I put the new lithium batteries in at a balanced SOC, but only at 13.4v, as I live off grid/very remote and ran out of gas for the generator. What should I be paying attention to as indicators for system health?
flexmax 80 outback charge controller
8x140w panels - 1120w
4 206ah SOK - parallel - 12v system 812ah
3000w pure sine inverter
flexmax 80 outback charge controller
8x140w panels - 1120w
4 206ah SOK - parallel - 12v system 812ah
3000w pure sine inverter
Last edited: