diy solar

diy solar

Getting right MPPT for my solar

klempak

New Member
Joined
Oct 30, 2021
Messages
43
I am running into issue properly sizing my MPPT for my solar panel.....I have one LG355N1C -V5 on my van and victron site is stating MPPT 100/30 however www.explorist.life is stating 100/50. Not sure what to choose? Also what would be proper size disconnect/isolator for my panel. Thank you!
 

Attachments

  • lg.jpg
    lg.jpg
    86 KB · Views: 15
We need to know your battery voltage

If it's 12v then the Victron 100/30 will work

If your voltage is 24v, then an even smaller controller will work like 75/15
 
Last edited:
For your low voltage, and current any of those cheap dc breakers on amazon will be fine. I'm assuming you're using PV cable? If so that should be rated for 30a and you'll never overload it with that one panel.
 
For your low voltage, and current any of those cheap dc breakers on amazon will be fine. I'm assuming you're using PV cable? If so that should be rated for 30a and you'll never overload it with that one panel.
Yes I am using PV cable.
 
Back
Top