So the inverter (x1 7.5d ) was around £1500 .
So the inverter is currently set in lead acid mode , you can set all the correct charge parameters, this way it doesn’t need canbus comms with the inverter . I’ve got the correct valence UBMS programmed for my set up which controls a relay to disconnect so I’m confident in the set up . I’ve got the canbus usb dongle and regularly check the batteries with the valence c&m software and they’re all really well balanced .
There’s a French guy that’s well clued up with these systems that sent me the configuration file for the BMS . He’s developed a canbus bridge to go between the inverter and the ubms , ( he purchased an inverter same as mine after I told him about them) he sent me the canbus bridge but it didn’t work as expected on my system so he’s trying to figure that out .
To be honest it’s run really well as it is for the last 4 months , I’d just like to get the info easily into home assistant from the valence ubms .
Cheers for now