Search results

Yes, definitely not ideal. It's just a temporary configuration to test out a new MPPT I'm getting and wiring my two 3s2p arrays in series is simplest since I have easy access to the pos/nev leads of each array. Thanks for the confirmation folks!

Essentially that's the new temp config, but not a direct 6s2p. The negative of the first 3s2p array would go into the positive of the second 3s2p array. This is in contrast to all 6 panels in the first string being connected, then paralleled to the second 6s string like a normal 6s2p config.

I want to temporarily reconfigure my arrays to test a new inverter I have coming. Currently, I have 2 separate 3s2p arrays (all panels are identical), each going into their own MPPT. The new inverter has a larger MPPT, so I'm thinking to wire my two 3s2p arrays in series to run into the new...

You could use rack batteries. Get a SCC to charge the rack batteries from your solar, then a DC:DC upconverter to bring your rack battery voltage higher to maximize the Delta Pro charging input. Or if the rack batteries BMSs support it, run them in series to increase the input voltage into the...

Thanks folks. The setup idea is 6x 400W panels: 4 vertically mounted and 2 horizontally mounted (in 3s2p config). I'd like to get 2400W if possible as my solar charge controller can handle 1600W and I'd like to overpanel to maximize how long I can actually feed 1600W into my SCC. My current...

Code aside, is there a general rule of how much a panel can overhang the roof edge (pitched roof on building, not on a mobile vehicle). The panel would be on racks that would extend past the roof edge. I don't get any snow, but do get winds sometimes into the 30s or 40s mph. Thanks.

I got Hanwha Q.Cells. To maximize power into the Delta Pro due to it's current limit, I'd recommend getting panels with higher Vmp (but not exceeding the input voltage limit of the Delta Pro when looking at the PV Voc). Example: Panel A has Vmp of 37V (Voc of 44V). Panel B has Vmp of 33V (Voc of...

Yes, EcoFlow panels are very expensive relative to other brands. Their price reflects their portability, which you'll ways pay more for. Any panels will work as long as your configuration doesn't exceed the input voltage of the Delta Pro.

Thanks rmaddy! I thought I needed to size it for the panels. I think I'll go 63A to have extra headroom for more panels. Thanks!

I'm getting 6x Hanwha 400W Q.Cell panels that will feed in to an EcoFlow Delta Pro in a 3S2P configuration. Each panel's Isc is 11.14A, so 2 parallel strings will have an Isc of 22.28A. I'm looking to put a breaker between the PV panels and the Delta Pro. If I apply 25% for NEC, and another...

Yup, that wiring diagram is right. I'm looking at 6x Aptos 370W. I wanted to get the REC, but they're sold out everywhere. I think because they're discontinued as REC pushes their 400W and 405W panels, but those are super pricey.

You should be fine running 3 of those panels in series, unless you live in really cold weather (PV voltage rises at lower temp). You'll be just under the Vin limit. I tried to get an answer from EcoFlow if there's a bit of headroom above their 150V, but they wouldn't tell me. I decided to play...

Bluetti and EcoFlow are the most established brands that offer these large semi-portable power stations. Most other brands are unknowns for support, company longevity, and ability to deliver if it's a crowd funding campaign. Both AC300 and Delta Pro have their Pros and Cons. The AC300 has...

I could've gotten 2x Delta Pros. I think the pre-sale price for the Pro+Battery was a larger difference initially, so I went that route. Looking back, I probably should've gotten 2x Delta Pros.

You must use their expansion battery packs (I bought the Delta Pro + Delta Pro Battery so I have 7.2 kWh). Hopefully they'll continue to make newer packs backwards compatible for more future capacity upgrades. You can use any solar panels you want as long as you don't exceed 150V PV input. I'm...

Yup I did! It won't ship until November. They upgraded the solar charging from 1200W to 1600W, which is great. And the 10yr warranty is awesome. The $/Wh couldn't be beat in a ready to go setup (been following the Bluetti AC300 also, but that's considerably more $/Wh). It was similar $/Wh to if...

Thanks Bud!

Great! Thanks again!!!

Would a breaker like this work? Can I just mount it in a some sort of enclosure and mount the enclosure on the wall? https://www.amazon.com/dp/B08H1QJSQY/ref=cm_sw_r_u_apa_glt_fabc_SVZ72F1F8TN46MYJXF8E?psc=1

I found some DC Disconnects on Amazon for solar. 2-pole single throw, some are 4-pole single throw. They're rated between 600-1000VDC and 32A. Not sure if that's sufficient. I also found some inline MC4 30A fuses. Are those needed if I have the Disconnect? I assume per code, the fuses aren't a...

FilterGuy: The spec says "Solar charging 1200W Max, 11-150V, 13A" Does that mean 13A coming out of SCC to charge the batteries? I read that as max input current into SCC from panels. 740GLE: What do you mean by home run? I can buy a one of those disconnects with a handle or fuse/bar that...

Thanks again FilterGuy! Since I'll be doing 2S2P or 3S2P, it doesn't seem like I need to deal with an OCPD. Question on wire sizing...the panels have Isc of ~10A, so that's 15.6A per string, or 31.2A total. Since the SCC limits the current to 12A, do I still need to size the output wire to...

Awesome. Thanks FilterGuy! Now I just have to decide if I want 4x panels for ~1480W or 6x panels for ~2200W. Also, what was the protection device I need to add when I have strings of panels in parallel?

I just watched Will's video review of the Bluetti AC200Max. I was looking at that system and while I do like it, the EcoFlow Delta Pro was much lower W/$ with the initial discount. Will overpanel'd his AC200Max considerably. I was initially planning to run about 3x 370W panels in series for...

Thanks for the idea Micheal. I was planning to mount 3 panels on the W-facing side if my garage roof and my property isn't big enough to have a ground mounted setup where I can change it's orientation. Considering the Impp of 400W panels is around 10A, even if each series string was only...

Thanks again rmaddy! Yeah, that's the concern. Great for a while till we hit some weird super cold streak from global warming or something. It doesn't help that the info out there is a bit contradictory. Great to know the panels actually can get close to their marketed ratings. I'm trying to...

Thanks rmaddy. From what I found researching, STC is 25C cell temperature (which requires an ambient temperature of around 0-3C). NOCT is 20C ambient temperature, which results in a cell temperature of 45C. So comparing apples to apples: STC is 25C cell temp vs. NOCT is 45C cell temp ...or...

Hi guys. New to the forum, but have been watching Will's videos for some time now. I ordered an EcoFlow Delta Pro on the Kickstarter campaign and am trying to figure out the solar panel setup to keep the Delta Pro charged. Here's some info: Location: I live in Southern California where summers...