Search results

Thanks Z! I am either going to get a 48v battery and another inverter or just a 48v battery It seems I am not communicating what is going on - I have measured each panel individually and the end of the string, continuity etc etc There is no draw on the inverter - nothing is hooked up that...

This inverter was suppose to run with or without a battery. I am trying to figure out why the AMPS are showing .1 when it shows proper at each panel and at the end of the string(5panels in series). The volts are showing correctly at the inverter, panel and the end of the string and match what...

OK, I checked every panel on the front roof - brown color roof. The amps and volts are correct on every panel (10 panels) I ran 5 in series to the inverter and the amps are correct at the fuse and volts. The inverter shows proper volts but .1 amps and 25 watts - attached are the photos. This...

wiring was done during install but not the home run. Volts are coming in correctly 6 panels creating 209-208 (6 panels) volts at the inverter and the voltage meter is reading the same on both sides of my shut off. There is no shade on the panels except for the crate myrtles on the left run...

So it is in series (leap frog) and done to save from one end having along home run. My problem is I have panels I purchased new that are Aionrise and 330watts each. I turned 2 of the leap frogs into old school in series with 2 long home runs but still do not have anywhere near what the watts...

LVS SP 6548 inverter/charger - everything purchased from Sungoldpower through this sites links - THANKS!! Panels - Aionrise 330W Mono-Crystalline PERC ( BLACK ) Did a leap frog using (8 gauge wire for a 20 foot home run), the leap frog using 10 panels seems reasonable since the home runs are...

Thanks! Im guessing it would be safer to run a fuse at every panels + but more expensive? Do you think the 10 gauge will work for the run to the inverter?

That was what the PDF has for the panels Maximum Rating Maximum System Voltage 1500 V Series Fuse Rating 20 A Thermal Rating

Good morning, Lots of questions as I am going to install soon Here is the inverter I have as listed and linked above from a year ago - Built-in MPPT solar charger max 120A and utility battery charger max 120A, Max PV input 250V (Voc) ,Dual PV input Here are the panels I have...

Good morning, Lots of questions as I am going to install soon Here is the inverter I have as listed and linked above from a year ago - Built-in MPPT solar charger max 120A and utility battery charger max 120A, Max PV input 250V (Voc) ,Dual PV input Here are the panels I have...

Thank you all for the information!

I am trying to power 1500 sq feet with 2 window units, 2 fridges, 1 deep freeze, TV, a few lights and internet during hurricane power outages etc...... and may bump up to day time use but that is later.....this would require running a couple more inverters, more panels and a larger battery...

I posted/edited earlier and there is a link to the unit purchased via this site.

Got it, so opposite my post. In series increases volts, parallel increases AMPs

So if I have solar panels that are each 370W with 47.8 VOC and 9.81 AMPS I can run 5 in parallel which would cause the VOC to be 47.8x5 and still under the 250v (VOC) of the inverter while not increasing the AMPS (seems many do not like this due to efficiency loss and needing to put a fuse at...

https://sungoldpower.com/collections/48v-inverter-charger/products/6500w-48v-solar-charge-inverter-parallel-wifi-monitor?sscid=41k6_h13b7& purchased via the link from Wills site and Thank you for any helpful insight. Goals are to run this type of system to power 2-3 window units, 1 deep freeze...

Posted the link from Wills page. Thanks!

https://sungoldpower.com/collections/48v-inverter-charger/products/6500w-48v-solar-charge-inverter-parallel-wifi-monitor?sscid=41k6_h13b7&

What solar array and what wiring is required to run in parallel? THANKS! 48V Inverter Charger 6500W 48V SOLAR CHARGE INVERTER PARALLEL + WIFI MONITOR UL1741 LISTED...