Search results

I did new settings, same issue higher bat voltage, I tried every setting unsuccessfuly, I think I have to set up everything like it was before connecting back my eg4 6000ex that wasn't reliable but it didn't want to damage my batteries

Yes that's exactly what is doing, charges the battery enough then at 1% goes to battery mode draining battery again and again

How is supposed to be set? 0 means 0 amps right?

Having issues with my 6k xp charging battery when on grid but the ac charging was disabled, it shows 65 watts about 1.5 amps but slowly gets the voltage high enough to get the batteries online then cycles every 20 minutes from grid to off grid, called signature solar and they set it up telling...

Having issues with my 6k xp charging battery when on grid but the ac charging was disabled, it shows 65 watts about 1.5 amps but slowly gets the voltage high enough to get the batteries online then cycles every 20 minutes from grid to off grid, called signature solar and they set it up telling...

So it will work the same as my 6000ex right?

So this one is not a hybrid like my 6000ex?

So if my batteries run down it will automatically change to grid?

I called signature solar to ask if I can substitute a 6000ex with a 6000xp and she said is not apples to apples to compare them and is strictly off grid, but in the manual I see the grid bypass, please help me take a decision

I did change the ups setting to appliance and is working good, not draining batteries

OK I don't see amp limit, I see 150 v limit

28 amps 120 v max open voltage, 90 working voltage

Inpinvt 60 amps, never gets over 40

Great! Thank you and God bless you

Hi, I have 9 solar panels aiming south and I want to know if i can set 9 panels aiming west because in the afternoon is when everyone gets home and the batteries began discharging, can I connect them in parallel with no issues or need blocking diodes?

Is current connected better than ss?

My kid told me my 6k sounds like a plane too

My eg4 6000ex powers my dryer no issues 5800w 3000w on one line and 2800w in the other, can dry 5 loads on a sunny day but I need to turn off the grid input in the inverter if not it will draw all power from the grid

Now my question is with the xp being high frequency I have electric motors to run and my dryer runs on it, would it be a problem?

I see an idle draw of 200 watts on mine

I'm tired of being to be monitoring this inverter to see if it's not messing up, one day is not going to grid when batteries low the other takes power from grid for no reason, this morning began charging from the grid for no reason, have to reboot it to get it going normally again, looking for...

I appreciate your reply

Can I install solar edge optimizers on my system running an eg4 6000ex?