I would. BUT
I would keep max loads to around 2000 watts and charge no more that 1500 watts.
You can set charge and discharge limits in the 6000xp so it is totally doable.
I would. BUT
I would keep max loads to around 2000 watts and charge no more that 1500 watts.
You can set charge and discharge limits in the 6000xp so it is totally doable.
So keep in mind, even with the reduced currents, you would still want to wire it with 1 awg or 1/0 on the battery. This is so you do not need to buy wire twice or run into trouble in the future after expansion or forgetting about not upgrading the wire.