48v Eg4 LiFepower4 battery terminal coating

[Mannfamilywoodworks]

Has anyone ever used a type of grease or glue to cover the terminals on the battery?

I’m imagining a product like a liquid electrical tape mixed with an anti corrosion gel?
Questions.
Is this something obtainable?
Should I coat my terminals for longevity sake?
The battery is in a shipping container.
It’s a small space. Condensation has occurred in the past but not recently since insulation.
Still I’d like to be safe and not risk loosing the battery.
I have a history of rust.

 

[sunshine_eggo]

I put NO-OX-ID "A Special" on 28 feet of aluminum bus bars (588 nuts/terminals) on my battery:



Couple options discussed here:

Custom Bus Bars From Copper Flat Bar

I had the same concern and asked that question here: https://diysolarforum.com/threads/how-close-can-bare-copper-bus-bars-be-12v.30555/ Not so much about a moth but if the battery protects were to open while the winches that are down stream from the battery protects were operating, would 12v...

diysolarforum.com

More discussed here:

MG Chemicals 847 Test

I'm posting this as a response to a comment from Paul F. Note: mR == milliOhm. Hypotheses I proposed: MG Chemicals 847 can lower the resistance in a connection between bus bar and battery terminal, especially in cases where limited torque can be exerted, or where the two connections are not...

diysolarforum.com

 

[Mannfamilywoodworks]

I put NO-OX-ID "A Special" on 28 feet of aluminum bus bars (588 nuts/terminals) on my battery:

View attachment 112624

Couple options discussed here:

Custom Bus Bars From Copper Flat Bar

I had the same concern and asked that question here: https://diysolarforum.com/threads/how-close-can-bare-copper-bus-bars-be-12v.30555/ Not so much about a moth but if the battery protects were to open while the winches that are down stream from the battery protects were operating, would 12v...

diysolarforum.com

More discussed here:

MG Chemicals 847 Test

I'm posting this as a response to a comment from Paul F. Note: mR == milliOhm. Hypotheses I proposed: MG Chemicals 847 can lower the resistance in a connection between bus bar and battery terminal, especially in cases where limited torque can be exerted, or where the two connections are not...

diysolarforum.com

Holy cow. That’s so cool. This no-ox-id you speak of has the two qualities I’m looking for it seems like.

 

[sunshine_eggo]

Note that the MG product may be superior, but both are good.