6000xp /w Solar Assistant and DIY Batteries

[dmkjr]

Have good coms between SA and inverter. Batteries are communicating fine (Seplos - JK BMs) with the 6000xp.

However, would enjoy seeing the individual cell voltages, etc from having the batteries communicate with SA.

Is this possible? I have a EG4 Coms Hub (I also have LifePower batteries), but do not think you can change the protocol from EG4 on the device.

Any idea how to make this function?

 

[Quattrohead]

However, would enjoy seeing the individual cell voltages, etc from having the batteries communicate with SA.

Cannot be done ATM, not sure if sa will do this sometime in the future. Email and ask them.
Currently only min, max and average.