6500ex Grid Support

[teal95]

Setting up 4x 6500ex as 3 phase. Can I tie 120 into one of them for grid support? I don't have 3 phase grid, only split phase. If I can use grid then I have a tied down base to hold 60Hz and would only need 1 more 6500 to have the effective power of 2 on each leg.

 

[EG4_Jared]

You would need to have the grid input on all 4 inverters. An example can be found in the manual.

 

[teal95]

That won't work then as I don't have 3 phase grid, only split phase.

 

[Will Prowse]

Need battery charger then. Or transformer.

 

[teal95]

No need for a battery charger, I have a SolArk 15k hooked to the same batteries.

 

[Will Prowse]

Nice, that will work