ggoodwin
New Member
Hi. I am just starting my first setup for my shed, and just bought a set of 12V 100w panels (https://www.amazon.com/dp/B07CTKT56Y?ref=ppx_yo2ov_dt_b_product_details&th=1)
When I received the shipment from amazon, the box it came in was in rough shape.
Is there an easy way to test the panels to make sure they still work properly?
(note: the top side of the panels were facing inward in the box so they may have escaped any possible damage that showed up on outside of box)
This is for use with PIP-1012LV-MS – 12V 120VAC 1000W AC output, 500W Max 40A Mppt Solar Input (https://watts247.com/product/pip-1012lv-ms/)
and LiTime 12V 230Ah Plus Low-Temp Protection LiFePO4 Battery, Built-In 200A BMS
I have the panel set and the 1012 in hand, the battery is on back order
When I received the shipment from amazon, the box it came in was in rough shape.
Is there an easy way to test the panels to make sure they still work properly?
(note: the top side of the panels were facing inward in the box so they may have escaped any possible damage that showed up on outside of box)
This is for use with PIP-1012LV-MS – 12V 120VAC 1000W AC output, 500W Max 40A Mppt Solar Input (https://watts247.com/product/pip-1012lv-ms/)
and LiTime 12V 230Ah Plus Low-Temp Protection LiFePO4 Battery, Built-In 200A BMS
I have the panel set and the 1012 in hand, the battery is on back order