abdelrahman mubarak
New Member
- Joined
- Apr 19, 2022
- Messages
- 15
hello everyone. please help
I'm using Sako 6.2 48v inverter with 48v 120ah lifepo4 battery from sako .. using it as ups charging from Utility only.
after charging to 100% , and charging stops, the battery start to discharge with 2.15 amps , while grid is on and no loads are connected.. the battery drops to about 90% and the inverter starts charging to 100% again .
the battery and the inverter same brand connected with communication cable.
battery type is set to LIB.
what the 2amps feed ?
how can I stop this ?
please help
I'm using Sako 6.2 48v inverter with 48v 120ah lifepo4 battery from sako .. using it as ups charging from Utility only.
after charging to 100% , and charging stops, the battery start to discharge with 2.15 amps , while grid is on and no loads are connected.. the battery drops to about 90% and the inverter starts charging to 100% again .
the battery and the inverter same brand connected with communication cable.
battery type is set to LIB.
what the 2amps feed ?
how can I stop this ?
please help