Connecting a battery monitor shunt to Daly BMS

[warrensn]

Newbie Question:
I have an AiLi battery monitor shunt. I also have a Daly 250 amp 24 volt BMS. The main negative of my battery is connected to the B- of the shunt. Does the P- of the shunt connect to the B- of the Daly, or does the P- of the shunt connect to the P- of the Daly? Whichever is not connected goes to a busbar to the negative charge/load. Is that right?
Thank you!

 

[Longboardlarry]

I was wondering the same thing

 

[Supervstech]

I would put the shunt directly on the cell terminal, and the BMS b connect to that.
That way, you measure even the wattage the BMS uses. Most accurate.

 

[Longboardlarry]

Sweet

 

[rietjens]

I build my battery like this, with the shunt between B- en negative of the batteries.