Do these numbers look right?

[jjphat]

Hey folks! Well, everything finally arrived and I got it all hooked up, so I figured I would hop back on here just to double check and see what anyone thinks about what I've got going on. I am using (4x) 48v 400w panels in a 2S2P configuration to charge a 48v 100ah lithium battery via a MakeSkyBlue charge controller. The battery then goes to a 3000w inverter, which is powering a refrigerator. I have attached some pictures of the charge controller and inverter displays. Do these numbers look right? Thanks again for everyone's replies in my other (and first) thread...just been waiting for everything to get here!

 

[jjphat]

The inverter is flashing between DC 54v and AC 110v too.

 

[jjphat]

I followed the instructions for the MakeSkyBlue controller and set D04 to 1, which is what they recommend for lithium batteries. That was the only thing I changed in there. I did not change anything on D06.

 

[jjphat]

D01 says 58
D02 says 58
D03 says 40