So I just replaced a fried 6500EX with a shiny new 6000XP inverter. I updated my Solar Assistant to the beta channel to get better LuxPower support, and everything went pretty smoothly. However, in the inverter details page, there is Voltage and Amperage lines for MPPT1, MPPT2, and MPPT3, which, I find rather confusing. What I find worrisome is that while MPPT1 shows a fairly safe voltage of 350-ish volts, MPPT3 always show something ~50v higher, like 393ish so far today.
Where is this extra mppt data coming from, and why is it so much higher? I'm worried about hitting that magic 480v where the smoke gets let out, even though I calculated a Max VOC of these panels of 57v even with a record low temp given their datasheet. I guess I extra worry because the datasheet doesn't really spell out what is with/without bifacial gain. The panels just say 460Watts (575Watts with bifacial gain).
Any insight would be greatly appreciated.
Where is this extra mppt data coming from, and why is it so much higher? I'm worried about hitting that magic 480v where the smoke gets let out, even though I calculated a Max VOC of these panels of 57v even with a record low temp given their datasheet. I guess I extra worry because the datasheet doesn't really spell out what is with/without bifacial gain. The panels just say 460Watts (575Watts with bifacial gain).
Any insight would be greatly appreciated.