EG4 LLv2 and rack wiring question

[jcollinsks]

I saw in Will's video that you need to flip the negative bus bar to get the battery to inverter connection on the bottom so it drains the batteries equally. Is that still a thing with the new versions?

 

[orion7144]

On the newer racks there are multiple locations to connect the main positive and negative so no need to rotate the bar.

 

[Sennen]

I just removed a little of the the heat shrink and used the handily sized holes at top and bottom. This made a better connection for doing 2 lugs (front and back vs stacked) i say this with stacked connections in the same photo.

 

[EG4_Jared]

On the newer racks there are multiple locations to connect the main positive and negative so no need to rotate the bar.

This would be correct. If you have any questions over installation, please let me know.

 

[jcollinsks]

This would be correct. If you have any questions over installation, please let me know.

Best wiring route for batteries to the inverter is still bottom of negative and top of positive correct?

 

[EG4_Jared]

Correct.

 

[jcollinsks]

Correct.

Hey @EG4_Jared , the busbar doesn't have 10MM bolts on the bottom most slot, should the batteries be wired above the final 10MM or am I missing something?

 

[EG4_Jared]

Would you be able to post a picture of this?

 

[jcollinsks]

Would you be able to post a picture of this?

Sure thing

 

[jcollinsks]

@EG4_Jared Just wanted to bump this up since the weekend, hope your weekend was great!

 

[jcollinsks]

@EG4_Jared any thoughts?

 

[EG4_Jared]

Apologize, I was not in office. However I would agree with this:

wired above the final 10MM

 

[jcollinsks]

Apologize, I was not in office. However I would agree with this:

No worries, I'll get the battery moved up then thank you!