Greetings! I'm stuck trying to program my EPEver model Tracer 4215BM with an mt 50 remote meter. When I enter the control parameters, the only battery types are user, floded, gel & sealed. I can't locate any setting for lithium? Not there. I have a Chins 200 ah lithium battery. When I power up the controller, it indicates sealed, 200ah. When I review the parameters, they are wrong for my battery. Anyone have any thoughts? I watched a video where the Mt 50 had two lithium options, but mine does not? I bought this unit as Will recommended it, but I'm very frustrated and ready to can it & buy a victron. Would greatly appreciate any help. Thanks.
EPEver programming problem
- Thread starter JDB
- Start date
sunshine_eggo
Happy Breffast!
3.3 Battery Type.
lithium is not listed.
MT 50 is only an interface. It only displays what the charger can do.
Sealed would work, but the float is a little high.
If you have a temperature sensor with that charger, DO NOT USE IT. It will apply temperature compensation, and you don't want that.
Select User:
14.4V boost
30 minute boost duration
13.5V float
0 minute equalize duration
The CHINS must have built in low temperature charge protection. This MPPT will charge below freezing.
I support your decision to can it and buy a victron. They're luscious, but they are a little rapey to the wallet.
Similar threads
