Hello, I just bought 2 brand new Motomaster Nautilus GC2 6v batteries to use in series for my 12v system. I am having issues learning/finding the proper parameters to set my Epever 4210an 40a MPPT charge controller at. I am currently using four 100w solar panels 2 series and 2 parallel for 24v going to the charge controller. What I would like to know is
Over volt disconnect
Charge limit
Over volt reconnect
Equalize charge
Boost charge
Boost reconnect
Float charge
Low volt disconnect
Low volt reconnect
Under volt reconnect
Discharge limit
Equalize time
Boost time
Sorry if this seems like alot but my brain is feeling like mush trying to read alot of posts in forums and coming up with nothing or information that changes from one place to another. Let me know if you need any more information
Over volt disconnect
Charge limit
Over volt reconnect
Equalize charge
Boost charge
Boost reconnect
Float charge
Low volt disconnect
Low volt reconnect
Under volt reconnect
Discharge limit
Equalize time
Boost time
Sorry if this seems like alot but my brain is feeling like mush trying to read alot of posts in forums and coming up with nothing or information that changes from one place to another. Let me know if you need any more information