Help programming XiaoxiangBMS 12v lifepo4

[Dallyb]

Hello
Can someone help me set up my XiaoxiangBMS. It is one of those that Batteryhokup sells. I have the app and it is ready to customize the settings. I am attaching photos. The system is CALB 40ah cells 4s3p for a 120ah 12v battery this will end up being charged with a Victron solar charge controller mppt.

 

[Dallyb]

 

[Stupid Monkey]

its the BMS used by this one

Finally found a LiFePO4 BMS with Low-temp Charging Protection

Spent the last few days and tonight testing BMS: 1. The "new" daly LiFePO4 BMS (that states in the data sheet that it has low temp charging protection) does not have low temp charging protection. And yes, it has a temp sensor attached. This disappointed me big time. Video to come. 2. Next, I...

diysolarforum.com

first post has a downloadable configured file/install/phoneapp

 

[Dallyb]

its the BMS used by this one

Finally found a LiFePO4 BMS with Low-temp Charging Protection

Spent the last few days and tonight testing BMS: 1. The "new" daly LiFePO4 BMS (that states in the data sheet that it has low temp charging protection) does not have low temp charging protection. And yes, it has a temp sensor attached. This disappointed me big time. Video to come. 2. Next, I...

diysolarforum.com

first post has a downloadable configured file/install/phoneapp

The Only problem is I cannot open that file on my iPad, I know I’m asking a lot but maybe someone could screenshot it and post if not I will try to get to a real computer. Thanks

 

[Bob B]

The Only problem is I cannot open that file on my iPad, I know I’m asking a lot but maybe someone could screenshot it and post if not I will try to get to a real computer. Thanks

There is an app on the App store for Apple. xiaoxiang BMS You will have to $5 for the pro version to change settings.

 

[Dallyb]

There is an app on the App store for Apple. xiaoxiang BMS You will have to $5 for the pro version to change settings.

Yes, I have purchased the app. I just need to know the proper settings. Again thanks

 

[Bob B]

Yes, I have purchased the app. I just need to know the proper settings. Again thanks

Sorry, I thought you weren't able to get it on the Ipad. I'll let others chime in on the correct settings.

 

[Stupid Monkey]

Screenshot from mine, only change from quoted post is changing low temp to 2 from -2

 

[Pierre]

Yes, I have purchased the app. I just need to know the proper settings. Again thanks

Do you have the manual ? https://diysolarforum.com/attachments/jbd-tools-user-manual-for-v1-1-17page-pdf.9623/

 

[ianlloyd100]

Does anyone hav e settings used and examples for Android?... I've go the App from Will's site, so am able to change the settings..

 

[wstcoaster07]

Also interested in the settings for the android app if anyone can share for my 12v CALB setup. I have read all the manuals i can find and don't know the difference between the Under/Over voltage settings vs the single full/cutoff voltage setting or why they would default different.

 

[MurderPony]

I remember, I had a very same problem a few years ago. But I used this thing for my e-bike. I was looking for a proper app for about 2 weeks and didn't find it. Then I've realized that this BMS is Chinese and contacted the manufacturer. There was a 4 MB file. I used it and it worked. BTW, while I was doing it, I started to study Cisco nets (I was hoping to create an app on my own) and now I'm on my way to Cisco Certification Exams. Such small thing as missing soft changed my life.