I have 16 280ah LIPO4 EVE cells in a 16s setup . Can someone recommend a really good BMS for this amount of current? I figure i need at least 150amp

[spikebetrayer]

i need a great quality BMS and must have communication to Growatt invertor using 485 for connection. TIA

 

[Sun in Lithium]

Check out this thread.
I got one but haven't hooked it up yet.

Seplos CAN BUS RS485 48v 200A 8S-16S BMS

Anyone already tested this BMS? Seplos CANBus/RS485 48V 200A 8S-16-BMS Looking to make a Solar storage battery bank with 16 x LiFePo-4 280Ah cells in a 48VDC config giving me a capacity of around 13,5kWh and it would be great if it can communicate with either Victron or Fronius inverter. This...

diysolarforum.com