Hello folk !
I'm extending a Wifi logger I've built for Daly BMS to JK-BMS .
From an hw point of view my logger (dalybmswifi.com) for daly is fully compatible with JK , c libraries written BUT I miss of a JK BMS that's why I'm unable to test it .
There's anyone able to get a full reply frame from JK-BMS after having issued the following command to the GPS port ( 115200,8,N,1 ) ?
This is the command to ask for all the BMS info:
0x4E, 0x57 , 0x00, 0x13 , 0x00, 0x00,0x00, 0x00, 0x06,0x03, 0x00 ,0x00, 0x00, 0x00, 0x00,0x00, 0x68,0x00, 0x00, 0x01, 0x29
4E5700130000000006030000000000006800000129
Any support is welcome .
Thanks,
paolo
I'm extending a Wifi logger I've built for Daly BMS to JK-BMS .
From an hw point of view my logger (dalybmswifi.com) for daly is fully compatible with JK , c libraries written BUT I miss of a JK BMS that's why I'm unable to test it .
There's anyone able to get a full reply frame from JK-BMS after having issued the following command to the GPS port ( 115200,8,N,1 ) ?
This is the command to ask for all the BMS info:
0x4E, 0x57 , 0x00, 0x13 , 0x00, 0x00,0x00, 0x00, 0x06,0x03, 0x00 ,0x00, 0x00, 0x00, 0x00,0x00, 0x68,0x00, 0x00, 0x01, 0x29
4E5700130000000006030000000000006800000129
Any support is welcome .
Thanks,
paolo