Need BMS communication with Eco-worthy Inverter

[dwhoover]

I am putting together a 48V DIY battery bank for use with an eco-worthy 5K inverter. I would like to have a BMS that will communicate with it... I have looked at daly and overkill But I don't believe I can communicate between the 2 with Rs 485. Any recommendations?

 

[wpns]

What RS485 or CAN protocols does the Ecoworthy support? That’s your starting point.

 

[dwhoover]

It supports quite a few of them... I am looking for someone who currently has that set up. I found A guy that has Rs 485 set up with Poly but I can't seem to find out where he is selling it he wants you to join his Patreon before he will consider selling to you..good grief.

 

[kommando]

The JK PB BMS does a number of both Canbus and RS485 comms to inverters. The Ecoworthy is not one of them so you need to find out which ones it does and then see if the JK PB BMS has a matching RS485 inverter protocol. I will try and list the JK ones later. But you need confirmation someone has a working Ecoworthy and a JK PB as even if they have a match one of them may have implemented it wrongly.

 

[dwhoover]

It looks like the JBD BMS *might* work