Hi folks,
Just trying to get everything to jive right with my solar system. Been reading around online but figured I'd post here to see if anyone had some good solid advice.
I'm wondering how I should set my automatic transfer switch's "Low Voltage Transfer Setpoint" and "Battery Recover Setpoint". I am using the MOES ATS Dual Power Transfer Switch with a 48v 100AH battery which has these numbers:
Battery Max charging voltage 58.4
Minimum Discharge voltage 40
So basically I'm trying to figure out which would be the best numbers to be having the transfer switch go back and forth between the grid power and the battery.
Thanks!
John
Just trying to get everything to jive right with my solar system. Been reading around online but figured I'd post here to see if anyone had some good solid advice.
I'm wondering how I should set my automatic transfer switch's "Low Voltage Transfer Setpoint" and "Battery Recover Setpoint". I am using the MOES ATS Dual Power Transfer Switch with a 48v 100AH battery which has these numbers:
Battery Max charging voltage 58.4
Minimum Discharge voltage 40
So basically I'm trying to figure out which would be the best numbers to be having the transfer switch go back and forth between the grid power and the battery.
Thanks!
John