Oldphile

Here's a more accurate description of what I'm seeing. This is the corner where it changed from 90%.

You ARE a trusting sole :) Since access is unencrypted and wide open I am not so sure that is safe. Does not have to be Sol-Ark messing...

I have 4 Pytes V5 batteries and I've also seen SOC stall at 90%. Once it moves to 91% charge current begins to ratchet down.

That looks defective. They forgot to put yours together. You might want to request a refund. Or maybe this is the Ikea version? lol

Getting back on topic now…….

We pay for whatever watts the utility meter registers (whether correct or not.) In the U.S., only maybe some industrial customers get...

Unfortunately there isn't one "cookie cutter" setup that "is the most efficient way" to run every system! There are multiple things that...

This is what I have. I'm only cycling the batteries to see how the batteries and system perform. I got batteries solely for backup. I...

Turn off grid charging. Let the solar fill batteries as much as it can. Let your load drain batteries as much as it can. That is the...

@Carlos_Sol-Ark has set it to 99% to try that.

There's no SOC charge limit setting for PV. The best I can do is set loads first, not batteries first. That just extends how long it...

Sol-Ark tech support seemed to be concerned about rising grid voltage. He asked if it had risen to 126 volts. There's 3 Sol-Ark 15K on...

Yes, they do claim that it functions on the grid port.

This is the functionality that Sol-Ark says they no longer support. If loads + charger exceeds the Gen Limit setting the inverter will...

Yes batteries are full when this happens. It was also happening without batteries, but would recover in 5 minutes. Now I have to...

Click on issue

It's been 3 weeks since tech support last responded to my issue. Correspondence has been email. Will I get a better response if I phone...

It just got worse. After no PV for 20 minutes I tried PV disconnect for 15 seconds. That resulted in about 300 watts PV. Then I tried AC...

No, it's not. The Powerwall operates in different modes when grid is and is not available and the AC output is not the same in each...

I found a great local engraver who was familiar with solar placards and labels. The turnaround time was 24 hours and when I finished...