SOK rack terminal cover

[Bluedog225]

Until somebody comes up with a better solution, this is what I’m doing to cover the “extra” terminal on the SOK rack batteries.

It’s a cap from a propane bottle, but any right sized cap would work. Filled it with a little goop and stuck the bolt in.

Works good; looks ok; and if the cap falls off, the goop should still provide insulation.

 

[wrench 87]

I was thinking about using nylon bolts,so they would not be conductive. your idea is great can you buy those caps any where?
You could just drill a hole through the cap, then you would not need the glue.

 

[Bluedog225]

Just a random cap. The nylon bolt is a good idea.

 

[Marcaroni]

I just taped them up with good heavy duty electrical tape. I had a 2” roll that I used.