Solis inverter and Grid export

[Grinzola]

Solis inverter is showing No export to grid when option switched on and exports to grid when switched off

Also when there is Sun like today but Little if any load and the Batteries are full Nothing is displayed on the Panel output

 

[SeaGal]

Welcome! Those images are a bit cut off... Are you enabling and disabling the export power control setting? Last image looks fine to me, EPS is not active and it is exporting.

Are you sure you're reading the on-off buttons correctly? - they are not intuitive!

 

[Grinzola]

Thanks you
The photos are in Sequence when export is on then there is no export
3rd pic when export is off then it exports

 

[SeaGal]

Can you retake the 2nd pic further back to see the top status line? When export is on and there is plenty of sun it should show something like "status: limited by eps", rather than "status: self mode". I'm trying to work out whether the issue is understanding the buttons or whether there is something else not configured correctly, such as the CT clamp the wrong way round, or CT clamp setting on Solis set to house, rather than grid.