aonavy
New Member
I got a got a weird question. I have the 2000w/240/2 phase inverter connected to 2x305w panels in series. When i connect the panels and turn on the inverter, voltage drops to 0. Turn the power off, voltage jumps to around 86v. Its almost like the inverter is killing the voltage. series or parallel it doesn't matter. Thoughts?
Panels
Panels
- Rated Power (Pmax): 305W
- Maximum Voltage (Vmp): 36.3 V
- Maximum Current (Imp): 8.41 A
- Open Circuit Voltage (Voc): 44.8 V
- Short Circuit Current (Isc): 8.97 A
- Maximum system voltage: 1000V (IEC) /600V (UL)
- Max Fuse Rating: 15A
- Dimensions: 76.93 × 38.7 × 1.57 in
- Weight: 50.7 lbs