Controller error code said low battery voltage (Lfp) tried to upgrade wire gauge in battery circuit to 10awg but the dc input connector I use for battery only seems to come in 12 awg is there a limit on 5.5x2.1mm dc input current around that wire gauge cutoff? Will I just need to get a new battery or smaller amperage solar controller? I have tried adjusting charging voltage on controller with no luck. Noone manufactured the cable I need 5.5mmx2.1 dc input to 10 awg
Any suggestions would be appreciated the system is a 200w solar panel to 30a solar controller to 512wh lfp anker powerstation
Any suggestions would be appreciated the system is a 200w solar panel to 30a solar controller to 512wh lfp anker powerstation