luckielab
New Member
- Joined
- Nov 26, 2020
- Messages
- 92
An acquaintance of mine is looking to connect three Jackery SolarSaga 100 solar panels to their new camper that has a Zamp "solar ready" port on the side.
I'd appreciate any feedback on the proposed setup below, please. Thank you!!!
Panels: Jackery SolarSaga 100 x3
Link: https://www.jackery.com/products/solarsaga-100w-solar-panel
Peak Power: 100W
Power Voltage: 18V
Power Current: 5.5A
Open Circuit Voltage: 21.6V
Short Circuit Current: 6A
Panel Combiner: Jackery Solar Panel Connector
Link: https://www.jackery.com/products/solar-panel-connector
It has 3 8MM female inputs for the panels and 1 8MM male output.
Controller: Renogy Elite 20A MTTP
Link: https://www.renogy.com/rover-elite-20a-mppt-solar-charge-controller/
PV Input Voltage Range: 15V-100V VOC
Rated Charge Current: 20A
Wires: PAEKQ DC 8mm Female to SAE Connector Adapter 14AWG Cable Wire (6Ft)
Link: https://a.co/d/5HiRogg
Suggest cutting this in half. Use one side to connect panels to MPPT, the other side to connect MPPT to Zamp port on side of camper.
I'd appreciate any feedback on the proposed setup below, please. Thank you!!!
Panels: Jackery SolarSaga 100 x3
Link: https://www.jackery.com/products/solarsaga-100w-solar-panel
Peak Power: 100W
Power Voltage: 18V
Power Current: 5.5A
Open Circuit Voltage: 21.6V
Short Circuit Current: 6A
Panel Combiner: Jackery Solar Panel Connector
Link: https://www.jackery.com/products/solar-panel-connector
It has 3 8MM female inputs for the panels and 1 8MM male output.
Controller: Renogy Elite 20A MTTP
Link: https://www.renogy.com/rover-elite-20a-mppt-solar-charge-controller/
PV Input Voltage Range: 15V-100V VOC
Rated Charge Current: 20A
Wires: PAEKQ DC 8mm Female to SAE Connector Adapter 14AWG Cable Wire (6Ft)
Link: https://a.co/d/5HiRogg
Suggest cutting this in half. Use one side to connect panels to MPPT, the other side to connect MPPT to Zamp port on side of camper.