What equipment besides batteries you've got with you?I I have 4 CALB 3.2 battery cells 3 of them 3.3 volts 3.5 how do I balance them
Option 1: 3.x volt battery charger. Charge each battery individually to 3.5 volts. Put them in parallel, and charge to 3.55 volts.I I have 4 CALB 3.2 battery cells 3 of them 3.3 volts 3.5 how do I balance them
What equipment besides batteries you've got with you?
BMS? Benchtop DC Power supply? Balancer Board?
No need if your BMS already has passive/active balancing built in.What is a balancing board and should I invest in one?
Daly BMSes are known to have 150mA passive balancers. If it allows Bluetooth configuration, then you need to tweak those settings to make sure it is kicking in at the end of charge cycle.I don’t have a built-in BMS I am using a daly BMS
What equipment besides batteries you've got with you?
BMS? Benchtop DC Power supply? Balancer Board?
If charging the cells whether individually or in parallel, then any voltage above 3.37 V will fully charge them.
However, you need to be concerned if the balance is being disturbed quickly. Usually indicates something wrong with BMS balancer settings