Anyone already tested this BMS?
Seplos CANBus/RS485 48V 200A 8S-16-BMS
Looking to make a Solar storage battery bank with 16 x LiFePo-4 280Ah cells in a 48VDC config giving me a capacity of around 13,5kWh and it would be great if it can communicate with either Victron or Fronius inverter. This BMS has RS485/CANBus com on board and could communicate with a second and more battery bank when needed.
I'm new to this battery stuff, but want to learn more. Since Belgium has changed the rules for reversing meter, I'm looking for a affordable solution/DIY Project to store the produced energy during the day and consume this during the night. I was thinking of a micro-grid system with Victron products.
I live in Belgium as mentioned before and have a 3 fase 400V+N 32A grid connection and looking for as less consumption as possible. I have 5740Wp (14x410W Canadian Solar panels in 2 strings) pointed 220° & Fronius Primo 4.0 Single fase inverter. Daly household consumption is about 15kWh with a max peakload around 5000W. If i can get this to work i'll get a similar second battery bank increasing the capacity to about 26kWh.
I'm open for discussion and advise.
Thx in advance
Seplos CANBus/RS485 48V 200A 8S-16-BMS
Looking to make a Solar storage battery bank with 16 x LiFePo-4 280Ah cells in a 48VDC config giving me a capacity of around 13,5kWh and it would be great if it can communicate with either Victron or Fronius inverter. This BMS has RS485/CANBus com on board and could communicate with a second and more battery bank when needed.
I'm new to this battery stuff, but want to learn more. Since Belgium has changed the rules for reversing meter, I'm looking for a affordable solution/DIY Project to store the produced energy during the day and consume this during the night. I was thinking of a micro-grid system with Victron products.
I live in Belgium as mentioned before and have a 3 fase 400V+N 32A grid connection and looking for as less consumption as possible. I have 5740Wp (14x410W Canadian Solar panels in 2 strings) pointed 220° & Fronius Primo 4.0 Single fase inverter. Daly household consumption is about 15kWh with a max peakload around 5000W. If i can get this to work i'll get a similar second battery bank increasing the capacity to about 26kWh.
I'm open for discussion and advise.
Thx in advance