Hi,
I am building a 12V 160Ah Lifepo4 battery with a Daly 200A BMS and recently purchased the AIMS Power 12V converter/charger to charge the battery. The battery and BMS appear to be functioning correctly with a current SOC of 13.2V. The positive cable is connected directly from the charger to the batteries positive post. The negative cable is routed from charger to the P- cable of the BMS to complete the circuit. I connected the battery cables to charger prior to plugging it in, then turned it on, but the red fault light is on. It remains on after unplugging the charger as well.
I have the dip switches both toggled to the "0" and have adjusted the current control from 0 to 100, but nothing changes. Do yall have any insight on what is wrong?
I'll have to wait until the weekend to try a couple of other things including, connect charger to other AGM battery as well as remove BMS from the Lifepo4 battery and connect directly to the POS/NEG terminals....not sure what else to do. The BMS has a 100A charge rating.
I am building a 12V 160Ah Lifepo4 battery with a Daly 200A BMS and recently purchased the AIMS Power 12V converter/charger to charge the battery. The battery and BMS appear to be functioning correctly with a current SOC of 13.2V. The positive cable is connected directly from the charger to the batteries positive post. The negative cable is routed from charger to the P- cable of the BMS to complete the circuit. I connected the battery cables to charger prior to plugging it in, then turned it on, but the red fault light is on. It remains on after unplugging the charger as well.
I have the dip switches both toggled to the "0" and have adjusted the current control from 0 to 100, but nothing changes. Do yall have any insight on what is wrong?
I'll have to wait until the weekend to try a couple of other things including, connect charger to other AGM battery as well as remove BMS from the Lifepo4 battery and connect directly to the POS/NEG terminals....not sure what else to do. The BMS has a 100A charge rating.