Lt.Dan
Solar Wizard
I feel this is the best way to describe it, but remember, I do not have the AC input wires connected to anything, as we are essentiallyessentailly "boondocking"
This is my inverter compartment, you can see the Green Wires are coming from the AC Input from the pole outside, this consists of L1, L2, Ground, and Neutral. The Yellow lines represent the AC Output from the inverters heading to the transfer switch. The L1 and L2 are kept seperate (to power each have of the breaker panel later), whereas the Grounds are connected together, and the neutrals are connected together.
This is the actual brand/model transfer switch I have. This transfer switch has a Generator input priority, (which is where the inverters are connected to) This represents the red line coming from the Grid, and also splitting off to meet the green wire in the previous picture to supply AC input to the inverters. The yellow line is a continuation of the AC Output from the inverters. The blue lines represents the wiring going out to the Breaker Panel/ Distribution panel, the blue wiring is still factory, as well as everything in the breaker panel.
Let me know if this helps, or if more information is necessary.
This is my inverter compartment, you can see the Green Wires are coming from the AC Input from the pole outside, this consists of L1, L2, Ground, and Neutral. The Yellow lines represent the AC Output from the inverters heading to the transfer switch. The L1 and L2 are kept seperate (to power each have of the breaker panel later), whereas the Grounds are connected together, and the neutrals are connected together.
This is the actual brand/model transfer switch I have. This transfer switch has a Generator input priority, (which is where the inverters are connected to) This represents the red line coming from the Grid, and also splitting off to meet the green wire in the previous picture to supply AC input to the inverters. The yellow line is a continuation of the AC Output from the inverters. The blue lines represents the wiring going out to the Breaker Panel/ Distribution panel, the blue wiring is still factory, as well as everything in the breaker panel.
Let me know if this helps, or if more information is necessary.