I'm realatively new to solar and needed some help. I have this EPever 5206BP 20 amp charge controller in a 12v system with a 12v SOK 100AH battery. I set the charge controller charging specs to what I could find online for the SOK 12v 100AH battery. I've hooked up the system today and I see that the charge controller kicks out at 14.1v. I checked my settings and I thought it was suppose to go to 14.6 to be fully charged? Wondering if I'm missing something or if the batteries own BMS charging perimeters are overriding what I set with the charge controller?
I can screen shot my charge controller setting if need be, I just need to hook up the cable to the charge controller to access the settings.
Not sure if I'm missing something here and not sure how important it would be for the voltage to reach 14.6v verses the 14.1v where it kicks out now.
Many thanks!
I can screen shot my charge controller setting if need be, I just need to hook up the cable to the charge controller to access the settings.
Not sure if I'm missing something here and not sure how important it would be for the voltage to reach 14.6v verses the 14.1v where it kicks out now.
Many thanks!