OleMan2765

👍

I think RS485.

Black wire is to laptop. Red wire is to buss bar

First is SA, second is power pack, third is Fuse, fourth is where the two attach to the MPP. One to MPP will not communicate with SA as...

Will do. Have to go get meds for MIL

Still no luck wits SA. Put in a ticket last week, they responded, wanting to gain admin access. I granted it to them last week. But SA...

I finally got connected to the batteries with BMS Tool. Thanks for the research. Good people and info on this site. Thanks

Finally got it to work. Doc EG4 sends needs to be updated on Baud rate. Moved two batteries yesterday. One is always 15 to 20% higher...

Thanks. Trying to get there. Pics I posted were from the Laptop. Tried three cables, and phone just would not connect. Even tried an old...

No to the video working.

That is a good video I will try that in the morning. Thanks. They set 19200 baud. Docs say 9600. Wish it would be correct on the docs.

No luck. Speed at 9600 correct? That's what is in the book. Still has Offline status.

Cable that came with EG4 Rack and batteries. Only has two wires. Orange and Brown. Labeled RS485. Now my phone wont connect to Laptop...

BMS Tools does not work. Always shows offline. Tried several Com ports all via the USB, none of them work. No luck with EG4 Support...

I use SolarAssistant, problem with that it quit working a week ago, and working with support on that. I match all your settings except...

Yes, did charge each separately to 100%SOC. That was the last time they were all at the same SOC value. MPP's do not communicate with...