Gavin Stone

If you have 2 inverters running in split phase, you wouldn’t use the black and red current sharing cables.

Consider some of the companies you mention have not even existed as long as their warranties. Midnite has decades of history, do you...

EG4 PowerPro: 280AH @ 51.2v = $3431 Battleborn GC3: 270Ah @ 51.2v = $9996 And the EG4 is less likely to have balancing issues....and...

I had a quick call this morning with signature solar on my 6000xp. Call was answered fast. I got a new guy out of training, but he told...

The battery rack should be grounded along with the rest of the system. I assume the device is at the battery rack so ground it at the...

I like to repurpose things. The two 6panel pole mounts in the background were made from visiting the local scrap yard. The poles are...

I didn’t have any luck with the rs485 and Pylontech with the hub. It didn’t offer that in CAN. However I think the Deye protocol...

We have updated the QSG to reflect the 7" spacing. I am posting it below. Quick Start Guide

I said my dumb ### was NOT going it alone ... 3/4" plywood with 1/4" backerboard, compressed fibre cement board, overlay. The...

The NHX is the newer generation of megarevo inverters. So it’ll have differences. The LCD display would be a large one

Yeah they have a lot of different protocols on that hub. Plus it is great to keep an eye on your pack with. You can see all the cells in...

The inveter uses Pylontech protocol. The lifepower4 batteries dont use that. But the lifepower battery hub does have that option. I just...

3 is just the limit for the internal bus bars. Technically if you are only using one 18kpv you could configure it differently and have...

Just wanted to give a brief update. I am testing the 10kw NHX right now with self-consumption - feeding power back in through the grid...

I would prefer a video also. It should be very polished. Graphics and PowerPoint included.

Yeah they are heavy for sure. I forgot to add this in there, and I think the manual mentions it also, but you take those bottom clips...

They're here. Expected the bent top mounting brackets as that was also an issue on Gavin's video. Did not expect 3 out of 4 cts to be...

It was likely something simple though. I think @Adam De Lay needs to get one of these on his wall and he can delve into it deeper.

I tried the CT’s both ways just in case. I also switched L1 and L2.

I am not sure what others have said (or not), but I will throw in potential reasons NOT to rout the PV frame ground into the inverter...