Most reacted posts

Thank you for your response. I had believed that EG4 inverter needed to use a serial cable interface. And transition over to the USB connector.

Using the 3000EHV-48 and a EG4-LifePower4 Lithium Battery | 48V Not to beat the dead horse... So if I start with 3 of these panels: Model Type: SG-200WM Peak Power (Pmax): 200W Production tolerance: ±3% Maximum Power Current (Imp): 5.28A Maximum Power Voltage (Vmp): 37.9V Short Circuit...

I'm trying to order the solar assistant kit from South Africa. I understand it's now certified to work with the EG4 3000 inverter and eg4 battery kit. I'm trying to order the proper components necessary to match up with my EG4 components. I see there is an orderable software and hardware...

Using the 3000EHV-48 and a single EG4-LifePower4 Lithium Battery | 48V Not to beat the dead horse... If I start with 3 of these panels (see below) in series with a total Voc 130VDC I'm obviously concerned with the 120 operating spec of the EG4 inverter. Model Type: SG-200WM Peak Power (Pmax)...

Thanks Mopat, I really appreciate your answering my question. Sincerely

Ben would you please send the coupon code for the updated firmware for my EG4-LifePower4 Lithium Battery | 48V 100AH I'm having low percentage of charging occurring as well. Thanks!