Hi thanks for reading this, I'm not going to piss and moan because I spent $500 on a refurbished Mini and it apparently bricked after a FW update today.
I also have a Delta Pro that I purchased as new from the same marketplace on e harbor
Remember that name before it was what it is?
I don't...
e harbor is, was eBay and I made the purchases from the official ecoflow store on that site.
Refurbished means potential e waste in this context, and refirbished has the limited warranty associated with it. Tick tock tick tock my warranty expired as this FW update appears. My DP says no...
Polarized and non-polarized breakers? What is the different use cases?
My limited knowledge says polarized capacitors are for DC or rectified AC, and non-polarized capacitors are (2) polarized capacitors sharing a package with their negative ends joined so they can pass AC.
Am I close? Thanks...
"Why is everything star minus and star positive?
I read about this in the book..
Commander?"
"We're checking it out there's a record. Proceed with caution, grab the nitroglycerin"
I've fancied obtaining one of these 'True' point of purchase refers, knowing the inherent inefficiency of the door and seals.
Does yours have the compressor on the top or bottom of the unit?
To me it sounds like you got lucky that it worked as long as it did on "VW passat power" and when you...
Hello, I have a DP also, the battery is rated 3.6kWh.
If I had to charge a 12v battery through the anderson port I would put a 20a fuse inline (240W) and after some time if that fuse didn't open I'd try a 25a fuse. Not very scientific.
I don't know what the total capacity of your battleborn...
Please recommend to me a good AND cheap IR device.
I'm familiar with FLIR and Fluke, are there any IR scopes or cameras in the sub-US $600 that isn't just a glorified heat gun with an LCD screen?
Thanks in advance for any opinions!
Theres a lot of relevant talk about load sharing on bus bars and it really can be a problem.
Solution- remove the bar geometry and make it a puck. Batteries connect to the peripheries and the load connects to the center. If all of the cables are same length, it may be messy but all of the...
I choose Makita batteries and tools a long time ago, since 9.6V nickel sticks.
The best 18V LXT Makita battery cartridge is the 1.5AH because the cells are wired in series.
All of the 3AH and up batteries have parallel cells without proper BMS.
I have (2) 6AH (4) 5AH (1) 4AH
Countless 3AH in...
Thanks ND, I’m glad to hear that experience, and that your rig and your goals are being met, I can’t say the same.
I apologize for the long delay in saying so.
Well I and we wimped out and purchased new ICE generators. They got an EU7000is and I got one of those Ryobi 1800 invertomatics from HD...
Hi,
My name is Andy and I used to run a remote off-grid 12V system with (8) 6V cart batteries and a 300w Triplite inverter when Backwoods Solar and Real Goods Sourcebook were my only go-to and the internet was in it’s diapers. So much simpler and slower then, the dark ages!
For several years...
That stand supports a 32" $5k or $6k display depending on screen finish that probably nobody here uses.
It's all aluminum and glass and it's heavy for a 32".
For considerably less money you can buy the VESA adapter and use any mount for the display that you don't own.
Hope the OP's saga ends successfully soon!
I've got to bite the bullet and start using a panel or two for a Delta Pro that I've owned since May. I was thinking of a pair of 550w or 450w Renogy off eBay. 150V max input on the MPPT has me hesitating. I've been discharging during peak demand to...
I would like to build same to power a 12V router and a couple IP cameras. One camera will have the battery and associated gear in close view. :cool:
If it was a FLIR camera (it won't be) that would be better.
Thanks to all of the respondents, I forgot about the Bosch and Festool and Porter Cable crowd.
All worthy brands that I would swing if I had them.
I have my dads Black and Decker 'Holgun' 1800RPM non-reverse drill made for aero in the 40's. I don't know what job he *stole* it, but it was...